Home Page | Cudy  ꄲ  Mesh/Repeater  ꄲ  Range Extenders  ꄲ  Outdoor AC1200 Wireless Range Extender and Access Point, Model: RE1200 Outdoor
ꁆ ꁇ

Outdoor AC1200 Wireless Range Extender and Access Point, Model: RE1200 Outdoor

  •  

    A Wide-Range RE or Fit AP

    Expand with AC1200 Wi-Fi

    Utilize MU-MIMO and dual-band features to connect with over 30 devices while minimizing latency (max 128 devices). For optimal performance when employing multiple REs, keep wireless extension in 3 hops from the main node or use Ethernet backhaul.

    Boosted Wi-Fi Coverage with Beamforming

    Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy RE/AP.

     

     

    Plug-and-Play Mesh Installation

     
    Simply Plug and Unplug for Mesh Setup
    Connect the PoE adapter LAN port to a Cudy Mesh AP/router/AC to add the new RE/AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing.    		 Leave the Rest to Adaptive Routing
    Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.

     

    Guide to Wiring and Physical Installation

     

    Ethernet Port with PoE

    Adapter included for —

    ● 24 V Passive PoE (Adapter included, not waterproof)

    Mounting Kit Included

    A mounting kit is included in the box, supporting—
    ● Wall-Mounting
    ● Pole-Mounting

     

     

    Specifications

     

    Hardware Chipset CPU: MT7628DA 580 MHz Processor
    Flash: 8 MB (64 Mbit)
    DDR: 64 MB (512 Mbit)
    Interfaces 1× 10/100Mbps Ethernet Port (Support Passive PoE)
    1× Reset Button
    1× WPS Button
    Power Supply 24 V Passive PoE (+4,5pins; -7,8pins)
    Dimensions ( W×D×H )

    Device Body: 240×100×53.7 mm 
    Antennas: 197.5×21.6×15.5 mm eacj

    Height of AP with Antennas installed: 438 mm
    Antenna Type

    2× Detachable Omni-directional Antennas
    Mounting Pole/Wall Mounting (Kit included)
    Wireless Wireless Standard:

    Wi-Fi 5 (802.11ac/n/g/b/a)
    Frequency: 5 GHz, 2.4 GHz
    Signal Rate:  5 GHz: Up to 867 Mbps
    2.4 GHz: Up to 300 Mbps
    Bandwidth 20/40/80 MHz
    Wireless Functions Cudy Mesh Satellite
    Enable/Disable Wireless Radio
    QoS (WMM)
    Band Steering
    MU-MIMO
    Beamforming
    Reboot Schedule
    Wireless Encryption WPA-PSK
    WPA2-PSK
    WPA-PSK/WPA2-PSK
    Weather-Proof Dust/Water-Proof IP65 (Protection against any dust and low-pressure water from any directions)
    Lightning Protection

    4 KV Lightning/Surge protection at the Ethernet port
    ESD 8 KV Contact / 15 KV Air ESD protection
    Working Temperatures

    -20/60°C

    -40/65°C Extend with Industrial SIM Card
    Operating Mode Range Extender
    Access Point
    Client
    Package Contents Outdoor Wireless Range Extender and Access Point
    2× Detahcable Wi-Fi Antennas
    24 V Passive PoE Adapter
    Mounting Kits
    Installation Guide
    Environment Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F)
    Storage Temperature: -40–70 °C (-40–158 °F)
    Operating Humidity: 10–90% RH non-condensing
    Storage Humidity: 5–90% RH non-condensing
    System Requirements

    Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux

     

●  Speedy AC1200 Dual-Band Wi-Fi Expansion
●  Wireless Extender / Access Point / Client Modes
●  Fast Roaming as a Cudy Mesh Satellite
●  Fast Ethernet LAN Port with Ethernet Backhaul Available
●  IP65, -20~60°C (Ext. -40~65 °C) Operation Temperature
●  8/15 KV Contact/Air ESD Protection, 4 KV Surge/Lightning Protection
●  24V Passive PoE
●  WPS Button, Reset Button